WT-320 effectively reduces the surface tension of the resin allowing for better penetration in the paper. The levelling characteristics will provide coatings free of fish-eyes, streaking and air blisters. This additive prevents pigment loss (dusting), bleeding in resin bath, and boosts the effect of hardeners in melamine formaldehyde resins without producing negative effects on the resin spot life. The reduction in resin surface tension and increased flow efficiency should be reduce the quantity of resin required for coating. Dosage percentage levels should be tested initially at the lowest recommended levels. If the desired results are not achieved, the dosage should be increased until the upper level is reached.

WT-320 can be used in combination with other additives to solve many product and process problems.

Properties:

Formulation: Mixture of higher molecular fatty acids.

Appearance: clear

Viscosity: 8,4 Pa.s

Density: 1.02 g / cm³

Shelf-life: Minimum 1 year

Dosage: 0.1% - 0.4% by weight on liquid resin.

PH:                              9 - 10

Environmental Considerations

Our Polymer Additives are water soluble, biologically degradable, non polluting and do not emit any harmful vapours during the manufacturing process.

Availability:

200 kg – barrels and 1.000 kg - containers

Product technical information and data is based on best information available and does not constitute or imply a warranty or patent infringement of any kind. User is responsible for testing product suitability prior to full operation use.