Products
Contact Us
- Address：Suite 807, TianAn Hi-tech Development Plzaza. No.555 North PanYu Road, PanYu DistrictGuangZhou, China.
- Tel：020-39211238
- Fax：020-39211286
Durakote PU-501
Brands：Durakote
Types：
Field of application：
Introduction：PU-501 is mainly used for rigid foam, wood crafts, and steering wheel, without any toxic and harmful substances, as pure concentrated liquid. The product has small viscosity, good dispersibility, easy spraying, convenient use, small releasing force, good weatherability, stable storage performance, no corrosion on the surface of the mould, no fouling phenomenon, and easy cleaning.
Physical Properties
Appearance ：yellow clear
water，ppm ：≤500
Release power，N/100cm2 : ≤40
Viscosity，mPa .S (25℃): 160-240
Application：
1, The release agent with 120# gasoline diluted to the appropriate concentration, the proposed multiple 1:6.
2, Spraying (or brushing) before the release agent, the mould must be cleaned with solvent, be sure to make the mould surface without rust or other pollutants, and then coated with release agent used.
3, The first spraying release agent, be sure to increase the amount of spraying.
4, The spraying release agent must be evenly distributed throughout the mould surface, can not be left dead corner, the edge of the mould should be appropriate to increase the amount of spraying.
5, After finishing the release agent, and other solvent evaporation, wipe the surface of the mould with a dry cloth and then inject material.
6, It is necessary to ensure that the container and compressed air are dry and moisture free. Otherwise, it is difficult to release.
7, Release agent not unused to fall back to the original packaging barrel, to prevent pollutants release agent.
Package：
30kg/drum
service
Manager Du
Hotline：