CN

Login/Registered

Shopping Cart

(0)

Contact Us

  • Address:Suite 807, TianAn Hi-tech Development Plzaza. No.555 North PanYu Road, PanYu DistrictGuangZhou, China.
  • Tel:020-39211238
  • Fax:020-39211286
  • current location:Home > Products > Water-based detergent
  • Duraktoe GR-338

      Brands:Duraktoe

      Types:

      Field of application:

      Introduction:GR-338 can remove rubber, oxide and dirt on mold surface in a short time, and release agent residue, such as epoxy, polyurethane and so on. GR-338 contains metal chelates and has high stability at high temperatures.

      Characteristic

      1.Hot mold can be directly washed, without cooling

      2.Odorless, non-toxic, pollution-free

      3.Less dosage, low cost, strong decontamination effect

      4.High boiling point, not easy to contact high temperature mold when boiling and burns

      5. Do not damage the mold and prolong the service life


      Method of use (hot mold):

      1 keep the mold about 150 degrees

      2 spray mold cleaner directly on the mold

      3. Two minutes later, use the copper wire brush to speed up the removal of stubborn stains

      4. Rinse with clean water, the mold, such as no electricity chromium, before drying should be immediately coated with antirust water protection

      5. The whole cleaning process takes only five minutes

       

      Applicaiton:

      Suite for all kinds of steel, iron and chrome mold

      Appearance    : Yellow

      Specific Gravity : 1.25  g/cc

      PH           : 13  

      Ignition point  : non flammable

      Boiling point  : 108 ℃     

      Storage       : Store below 35℃

      Shelf life      : 3 year

       

      Package    25KG/Drum

    online service>>

    Hotline:

    020-39211228