CN

Login/Registered

Shopping Cart

(0)

Contact Us

  • Address:Suite 807, TianAn Hi-tech Development Plzaza. No.555 North PanYu Road, PanYu DistrictGuangZhou, China.
  • Tel:020-39211238
  • Fax:020-39211286
  • current location:Home > Products > Solvent - based spray tank - stripping series
  • Durakote AS-311

      Brands:Durakote

      Types:

      Field of application:

      Introduction: AS311 is an aerosol product with rapid evaporation and low odor, It is the best choice when transferring is forbidden. The multiple release polymer system chemically bonds to the mold surface to form a micro thin heat resistant coating, suit for most of molding processes. Can be used for epoxy resin(thermosetting plastic or prepreg),rubber, polymer, thermoplastic ,adhesive and winding process.

      advantage:

      dry fast(<1 minute)

      No transfer

      No mold build up

      High heating stablity

      No CFC

      Low/No Odor

      High productivity

       

      Property:

      * appearance: transparent liquid

      * Odor:       Hydrocarbon

      * Solvent:    Fatty hydrocarbon

      * Specific gravity: 0.720 ± 0.010

      * Flash point: 31℃

      * Note : humidity sensitive,cover it after use

      *shelf life: 36 months

      * Thermal stability: 400℃(750℉)

      * Application temperature: 13℃--150℃(55℉--300℉)

       

      Mold preparation :

      The mold surface bust be clean and free of any release agent or other contaminants for AS-311 to be completely effective. Remove any contaminant with GR-338 or other solvents。

      For new mold

      Release agent can be bonded with completely cured new mold surface well. New fiberglass reinforce mold or epoxy resin mold should be cured completely.

       

      Application:*consult MSDS prior to use*

          AS-311 may be used at temperature 13℃--150℃ ventilately ,spray on the mold surface.

      1. Keeping the nozzle 8-10〞(20CM-30CM),from one side of mold to the other.

      2. Apply 2—3 coats, 1—2 minutes between coats for solvent volatilization。

      3. For release agent completely cured,30minutes should be allowed at room temperature and 1—2 minutes at 100—150℃(100—300℉)

      4. After using AS-311 a while,a perfect performance can be got. Reapply a coat when it becomes hesitate to release。

      5. When hesitate to release, reapply AS311 to the trouble part of mold or whole mold surface.


      NoteTouch up coats should be applied at regular intervals for more releasing应and less resin build up.

       

      Flammability /Storage

      AS-311 contains flammable solvents. The product should be always be used in well-ventilated areas. Store in a cool dry place. Keep container tightly closed when not in use.


      Package

      AS-311 package available:

      450ML/can, 24 cans/case。

    online service>>

    Hotline:

    020-39211228